Bosch 731cc High Resistance Fuel Injector with Long Pintle

Bosch 731cc High Resistance Fuel Injector with Long Pintle

Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so your set of injectors is matched within 1% across the entire set.

• 731cc/min at 3 bar (43.5psi)
• Suitable for use with ethanol, methanol as well as most oil based fuels
• Modern design offering extremely good idle control
• Full injector deadtime/battery compensation information is supplied with each set of injectors
• High impedance (high resistance) so no need to add ballast resistors on some ECUs
• Can be supplied with lower adaptors to fit most 14mm lower o-ring applications
• Unmodified Bosch injector
• Single Cone Spray Pattern
• Short length injector

Lower adaptor is an option.

Please note that this injector is a stubby short injector.  With a lower adapter it takes to to being a 3/4 length injector.  Therefore depending on whether you choose a bottom cap will vary what top caps are available to you.