Whiteline Front Control Arm Upper - Arm to Suit Chevrolet Silverado and GMC Sierra | KTA320

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

Installation

• Fitting time: 2 hrs
• Fitting difficulty: Suspension Specialist recommended. Use our Click & Fit service.
• Wheel alignment recommended: Front and Rear Wheel Alignment

Specifications

Compatible Vehicles

• CHEVROLET SILVERADO 1500 2007-2018 2nd Gen, 3rd Gen 4WD
• GMC SIERRA 1500 2007-2018 3rd Gen, 4th Gen 2WD
• GMC SIERRA 1500 2007-2018 3rd Gen, 4th Gen 4WD